HDMI Extender 100 Meter By UTP

HDMI Extender 100 Meter By Single UTP Cat5e/6 Full HD 1080P 3D with IR Remote Control Signal (EX-U100M/IR)
$60.00

The HDMI network extender replaces the HDMI cable over a CAT5e or CAT6 cable (recommended) and can extend the HDMI signal for 100 meters, reducing costs. As HDMI cables are expensive, it is very difficult to transmit HDMI signals over long distances. The purpose of the extender is to achieve long-distance signal transmission with low-cost wires. Connection and operation

1. Use a HDMI cable to connect the signal source to the emitter of the extender. The cable length can be up to 100meters

2. Use an HDMI cable to connect the signal end to the receiving end of the extension cable up to 100meters

3. Use a cat5e cable or cat6 cable (recommended) to replace the HDMI cable to connect the emitter and receiver of the extender up to 100 meters

4. Connect the 5V power to the extender and power the extender

Descirption 

  • Local Transmitter & Remote Receiver Included
  • No Loss of quality
  • Easy to install
  • Support CAt5e and Cat6 Ethernet Cabling
  • Power Over HDMI